Week 8: To Study and Implement RC Series Circuit
Objectives:
- To study and draw the phasor diagram of the current and the voltage.
- To calculate the impedance values in the circuit (RC).
A sinusoidal signal is applied to a series resistive-capacitance circuit, and the voltages develop across the resistor and the capacitor is investigated for amplitude and phase relationship to the input.
Download Files
Course Material
- Week 1: Basic Introduction and Resistor Color Coding Lab
- Week 2. To study the relationship between voltage and current with the help of Ohm's Law.
- Week 3. To implement and verify voltage divider in series circuit and current divider in parallel circuit.
- Week 4: To implement and verify Kirchhoff voltage law and Kirchhoff current law.
- Week 5: Analyze and Implementation of Thevenin's Theorem
- Week 6: Experimental Verification of Maximum Power Transfer Theorem for a Network.
- Week 7: To Study and Implement RL Series Circuit.
- Week 8: To Study and Implement RC Series Circuit
- Week 9: To Study and Implement RLC Series Circuit.
- Week 10: Power Factor Improvement by using Static Capacitors.
- Week 11. To perform No load test of the alternator to observe the change in its output parameters.
- Week 12. To perform load test of the alternator to observe the change in its output parameters.
- Week 13. Familiarization with construction and operation of Distribution transformer.
- Chapters 13
- Department Mechanical Engineering
- Teacher
Engr. Kiran Arshad
