Week 6: Experimental Verification of Maximum Power Transfer Theorem for a Network.
OBJECTIVES:
To prove maximum power transfer theorem practically.
Introduction:
Maximum Power Transfer Theorem
Theory:
The power transferred from a source supply source to load is at its maximum when the resistance of the load is equal to the internal resistance of the source. In other words “A resistive will be consuming maximum power from the supply when the load resistance is equal to the equivalent (Thevenin) resistance.”
Download Files
Course Material
- Week 1: Basic Introduction and Resistor Color Coding Lab
- Week 2. To study the relationship between voltage and current with the help of Ohm's Law.
- Week 3. To implement and verify voltage divider in series circuit and current divider in parallel circuit.
- Week 4: To implement and verify Kirchhoff voltage law and Kirchhoff current law.
- Week 5: Analyze and Implementation of Thevenin's Theorem
- Week 6: Experimental Verification of Maximum Power Transfer Theorem for a Network.
- Week 7: To Study and Implement RL Series Circuit.
- Week 8: To Study and Implement RC Series Circuit
- Week 9: To Study and Implement RLC Series Circuit.
- Week 10: Power Factor Improvement by using Static Capacitors.
- Week 11. To perform No load test of the alternator to observe the change in its output parameters.
- Week 12. To perform load test of the alternator to observe the change in its output parameters.
- Week 13. Familiarization with construction and operation of Distribution transformer.
- Chapters 13
- Department Mechanical Engineering
- Teacher
Engr. Kiran Arshad
